mac ethernet authentication server is not responding

There are two types of interfaces in OVPN server's configuration

This sub-menu shows interfaces for each connected OVPN clients.Īn interface is created for each tunnel established to the given server. Port=1194 mode=ip user='test' password='123' profile=default certificate=none auth=sha1 This example demonstrates how to set up OVPN client with username 'test', password '123' and server /interface ovpn-client> add connect-to=10.1.101.1 user=test password=123 /interface ovpn-client> printĠ name='ovpn-out1' mac-address=FE:7B:9C:F9:59:D0 max-mtu=1500 connect-to=10.1.101.1 Layer3 or layer2 tunnel mode (alternatively tun, tap) Max packet size that OVPN interface will be able to send without packet fragmentation. Name of the client certificate imported into certificate list.Ĭipher ( aes128 | aes192 | aes256 | blowfish128 Default: blowfish128) Whether to add OVPN remote address as a default route.Ĭertificate ( string | none Default: none) Sub-menu: /interface ovpn-client Properties PropertyĪdd-default-route ( yes | no Default: no) In order to avoid this problem, please disable(un-select) from web GUI System > NAT > IP Plug and Play.Note: OpenVPN username is limited to 27 characters and password to 233 characters Once IP Plug and Play is enabled, G-4100 will respond to ARP queries by its own MAC in order to enforce outgoing traffic passing through itself. The IP Plug and Play feature, also known as iPnP, allows a computer to access the Internet or the ZyXEL Device without changing the TCP/IP network settings (such as IP address and subnet mask) of the computer, even when the IP addresses of the computer and the ZyXEL Device are not in the same subnet segment. The root cause is by default 'IP Plug and Play(iPnP Technology)' is enabled over the G-4100. +-/LAN/-Windows 2003 Monitor Server Answer NB PC-G-4100 V.2-/LAN/-WiMAX Base Station. Is there any reason why the G4100 would try to change all ARP entries on the Windows 2003 server? When the customer changes the G-4100 to an ethernet router (no authentication),the issue does not re-occur. Upon checking the Windows 2003 ARP table all the devices on the LAN have the LAN MAC address of the G-4100.īy rebooting the box, the PING check over the Windows 2003 works again for 10-15 minutes. The windows 2003 server is running NetSpan software to monitor the WiMAX network and also runs a continuous ping to the WiMAX base station.Ībout every 10-15 minutes the ping fails. On the LAN of the G4100 V.2, there is a WiMAX base-station and a Windows 2003 server. A customer who is using the G-4100 V.2 as an gate keeper (authentication server) of a WiMAX network.

Mac ethernet authentication server is not responding